IE 456 Mold and Die Design (TEPE) Credits:3 Major Course (3-0-6)
Prerequisite: -
Tue 9.30 – 12.30 Room 216 (CAD/CAM room, Research building)
Lecturers: 1) Asst. Prof. Dr. Apiwat Muttamara
Email mapiwat@engr.tu.ac.th Tel: 3189 Office Room 423/3
Office Hours: Tue 13:30 – 16:30pm., Fri 13.30 – 16.30 pm.
http://moodle.tu.ac.th/course/view.php?id=1840
Course description
Fundamentals of mold and die designs; introduction to fundamentals of plastics including material selections, mold and die structure, process selection, surface treatments – chemical and heat treatments, coating and hardening, Standard mold and die for various processing types including mold construction.
Week |
Topic |
1 |
Introduction Mold And Die structure |
2 |
CAD for DIE design |
3 |
Die Assembly QUIZI |
4 |
Plastic Materials |
5 |
|
6 |
|
7 |
Case Studies / Mold assembly |
|
MIDTERM |
8 |
|
9 |
Plastic Materials/ Mold design |
10 |
Runner & Gate Design(CAE) |
11 |
Cooling system(moldflow) |
12 |
Simulation (QuizII) |
13 |
Case studies (Mold design) |
14 |
Mold Assembly |
15 |
Case studies (Mold design)II |
|
FINAL |
Reference Books:
1. Mikell P. Groover, Fundamentals of Modern Manufacturing: Materials, Processes and Systems, 2nd Ed., John Wiley & Sons, Inc., 2001.
2. LANXESS Corporation Part_and_Mold_Design, 2007. https://techcenter.lanxess.com/scp/americas/en/docguard/Part_and_Mold_Design_Guide.pdf?docId=77015
Evaluation:
Midterm 30%
Homework & Project Assignments 15 % Quiz 15 %
Final Exam 40%
LINK |
|
|
|
|
|
|
|
|
|
|
|
|